Prosim poradte mi uz niekto...
Nainstaloval som si SLED 10, na internet som pripojeny cez router, pri instalacii SLED-u siet nabehne a funguje spravne az dovtedy, pokial nerestartujem PC?!
Skusal som vsetko mozne ale....neviem.
Nemam staticku IP, pouzivam DHCP.
Vsetky distra Linuxu ktore som pouzival fungovali bez toho aby som sa dotkol akehokolvek nastavenia siete.
Ubuntu, Aurox, Fedora Core funguju na rovnakom zeleze bez problemov.
PS: rovnaky problem ako popisujem som mal aj so SUSE 10.1, co viedlo k mojej migracii k inemu distru.
pri ifconfig vypise iba lo, eth0 nepozna. Pise ze neexistuje interface... Uz pri bootovani je vidiet, ze to je blbe. Skusal som uz takmer vsetko co som na forach objavil: metodu ifup, network managera...
Preco pri instalacii funguje vsetko OK a po restarte je to mrtve?
Dakujem
Ako je vidno, nezavedie modul sk98lin. Pridal som ho aj natvrdo do premennej MODULES_LOADED_ON_BOOT a nic sa nezmenilo... Neviete poradit, prosim.
Tu je vypis relevantnych logov:
lspci
00:00.0 Memory controller: nVidia Corporation CK804 Memory Controller (rev a3)
00:01.0 ISA bridge: nVidia Corporation CK804 ISA Bridge (rev a3)
00:01.1 SMBus: nVidia Corporation CK804 SMBus (rev a2)
00:02.0 USB Controller: nVidia Corporation CK804 USB Controller (rev a2)
00:02.1 USB Controller: nVidia Corporation CK804 USB Controller (rev a3)
00:04.0 Multimedia audio controller: nVidia Corporation CK804 AC'97 Audio Contro ller (rev a2)
00:06.0 IDE interface: nVidia Corporation CK804 IDE (rev a2)
00:07.0 IDE interface: nVidia Corporation CK804 Serial ATA Controller (rev a3)
00:08.0 IDE interface: nVidia Corporation CK804 Serial ATA Controller (rev a3)
00:09.0 PCI bridge: nVidia Corporation CK804 PCI Bridge (rev a2)
00:0b.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a3)
00:0c.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a3)
00:0d.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a3)
00:0e.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a3)
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTra nsport Technology Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Con troller
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscella neous Control
01:0a.0 Ethernet controller: Marvell Technology Group Ltd. 88E8001 Gigabit Ether net Controller (rev 13)
05:00.0 VGA compatible controller: nVidia Corporation NV43 [GeForce 6600 GT] (re v a2)
--------------------------------------------------------------------
lsmod
Module Size Used by
joydev 9024 0
xt_pkttype 1792 3
ipt_LOG 5632 8
xt_limit 2432 8
snd_pcm_oss 42752 0
snd_mixer_oss 16256 1 snd_pcm_oss
snd_seq 46960 0
snd_seq_device 7948 1 snd_seq
button 6672 0
battery 9476 0
ac 4996 0
ip6t_REJECT 4992 3
xt_tcpudp 3072 3
ipt_REJECT 5120 3
xt_state 2048 12
iptable_mangle 2688 0
iptable_nat 7684 0
ip_nat 15660 1 iptable_nat
iptable_filter 2816 1
ip6table_mangle 2304 0
ip_conntrack 47916 3 xt_state,iptable_nat,ip_nat
nfnetlink 6040 2 ip_nat,ip_conntrack
ip_tables 11080 3 iptable_mangle,iptable_nat,iptable_filter
ip6table_filter 2688 1
ip6_tables 12360 2 ip6table_mangle,ip6table_filter
x_tables 11524 10 xt_pkttype,ipt_LOG,xt_limit,ip6t_REJECT,xt_tcpudp,ipt_REJECT,xt_state,iptable_nat,ip_tables,ip6_tables
ipv6 216704 13 ip6t_REJECT
apparmor 48412 0
aamatch_pcre 13440 1 apparmor
loop 14856 0
dm_mod 52200 0
i2c_nforce2 6272 0
i2c_core 19472 1 i2c_nforce2
sk98lin 132832 0
ide_cd 35360 0
ohci_hcd 17284 0
cdrom 32288 1 ide_cd
ehci_hcd 26760 0
usbcore 108804 3 ohci_hcd,ehci_hcd
snd_intel8x0 30108 1
snd_ac97_codec 82848 1 snd_intel8x0
snd_ac97_bus 2176 1 snd_ac97_codec
snd_pcm 79880 3 snd_pcm_oss,snd_intel8x0,snd_ac97_codec
snd_timer 20868 2 snd_seq,snd_pcm
snd 50692 10 snd_pcm_oss,snd_mixer_oss,snd_seq,snd_seq_device,snd_intel8x0,snd_ac97_codec,snd_pcm,snd_timer
soundcore 8672 1 snd
snd_page_alloc 9608 2 snd_intel8x0,snd_pcm
reiserfs 209664 2
edd 8516 0
fan 4612 0
thermal 13448 0
processor 22468 1 thermal
sg 30620 0
sata_nv 8836 3
libata 65168 1 sata_nv
amd74xx 12828 0 [permanent]
sd_mod 16144 4
scsi_mod 121992 3 sg,libata,sd_mod
ide_disk 14976 0
ide_core 115900 3 ide_cd,amd74xx,ide_disk
--------------------------------------------------------------------
rcnetwork restart
Shutting down network interfaces:
Shutting down service network . . . . . . . . . . . . . done
Hint: you may set mandatory devices in /etc/sysconfig/network/config
Setting up network interfaces:
lo
lo IP address: 127.0.0.1/8 done
Setting up service network . . . . . . . . . . . . . . done
SuSEfirewall2: Warning: ip6tables does not support state matching. Extended IPv6 support disabled.
SuSEfirewall2: Setting up rules from /etc/sysconfig/SuSEfirewall2 ...
SuSEfirewall2: Warning: no interface active
SuSEfirewall2: batch committing...
SuSEfirewall2: Firewall rules successfully set
--------------------------------------------------------------------
Toto je vypis casti startovacieho logu, sk98lin je nas modul...
Je jasne ze nazavedie modul sk98lin.
<3>sk98lin: Could not read VPD data.
<4>sk98lin: probe of 0000:01:0a.0 failed with error -5
<6>ACPI: PCI Interrupt 0000:01:0a.0[A] -> Link [APC3] -> GSI 18 (level, low) -> IRQ 58
<3>sk98lin: Could not read VPD data.
<4>sk98lin: probe of 0000:01:0a.0 failed with error -5
.
.
.
.
doneSetting up network interfaces:
lo
lo IP address: 127.0.0.1/8
doneWaiting for mandatory devices: eth-id-00:01:29:d3:b6:17 __NSC__
20 19 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
eth-id-00:01:29:d3:b6:17 No interface found
failedSetting up service network . . . . . . . . . . . . . . . .failed
---------------------------------------------------------------------
ip link show
1: lo: mtu 16436 qdisc noqueue
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
2: sit0: mtu 1480 qdisc noop
link/sit 0.0.0.0 brd 0.0.0.0
-----------------------------------------------------------------------
TAK, problem je vyrieseny!!!
Vyriesil som to tak, ze som pridal do premennej MODULES_LOADED_ON_BOOT meno modulu "skge", co je (stara verzia: sk98lin). Toto som nasiel na strankach abclinux.cz v sekcii urcenej pre zakladovky ASUS s rovnakou NET kartou a podarilo sa.